Perfect For…

Wall-a-Be Mounting Instructions

Back to Requirements

Download the Mounting Instructions [PDF - 51KB]

Starting with a clean dry wall, your Wall-a-Be can be mounted in just five easy steps. It is important to be patient and take the time to properly mount your Wall-a-Be.

  • Step #1 - Get A Friend

    Some Wall-a-Be’s can be very large; therefore, an extra set of hands will help with the mounting process.

  • Step #2 - Pick Your Spot

    Pick a smooth dry wall where everyone can see your Wall-A-Be. Most traditional walls in your house or office with standard painted drywall, work best. Wall-a-Be’s will not adhere to textured and pebbled walls. The actual size and space needed will vary, depending upon the size of the Wall-a-Be ordered.

    With a warm damp sponge, clean the wall ahead of time allowing 30 minutes to dry (DO NOT USE SOAP!).

  • Step #3 - Peel and Place

    1. BEFORE you peel the backing off of your Wall-a-Be, lay it on a flat surface. Gently begin the peeling process, and once completely removed, you are ready to place it on the wall. Make sure you start at the top and work down to the bottom. Again, working with a friend, is the best way to assure your Wall-a-Be is carefully put onto the wall.

    Note: If some of the backing paper comes off when you peel your Wall-a-Be, don’t worry this is not a defect. Just take the time and carefully remove the excess backing.

  • Step #4 - Smooth It Out

    Once your Wall-a-Be has been adhered to the wall where you want it, use the squeegee to smooth out any air bubbles.

  • Step #5 - Show It Off

    Step back and enjoy your Wall-a-Be.

    Note:Be sure to keep the items that arrived with your Wall-a-Be, including the tube, squeegee, and the backing. You may need these items for any future movement of your Wall-a-Be.

    FOLLOW THESE INSTRUCTIONS, SO THAT YOU DO NOT DAMAGE YOUR WALL-A-BE!!!

    For further instructions of questions, please view Frequently Asked Questions or contact us. Coming soon - Mounting instruction video on our web site.

    IMPORTANT HINTS:
    Not all painted walls are ideal for adhering Wall-a-Be's. If the adhesive sticks to itself, just slowly peel it apart.